High-performance Fan Heater
DCR 130 | DC 24 V, DC 56 V - 200 W to 800 W

  • High DC heating performance
  • Integrated adjustable thermostat or hygrostat
  • Small hysteresis
  • Integrated switch module
  • Panel or DIN rail mounting
  • Optical indicator (LED)

The compact high performance fan heater DCR 130 prevents formation of condensation and frost and provides an evenly distributed interior air temperature in enclosures with electric/electronic components. The fan heater is available with an integrated electronic thermostat or electronic hygrostat. The model with thermostat is available with internal or external sensor. The fan heater with integrated hygrostat is equipped with an external sensor. The external sensor can be positioned freely anywhere in the enclosure for precise measurements of temperature and humidity. The DCR 130 was designed for wall fixing. For fixing on the bottom of the enclosure the fan heater DCR 030 is recommended.

Technical data

Download PDF

Heating elementhigh performance cartridge
Overheat protectionwith automatic reset and second-tier one shot fuse
to protect against overheating in case of fan failure
Heater bodyextruded aluminium profile
Axial fan, ball bearingservice life 50,000h at 77 °F (25 °C)
Air flow, free blowing94 cfm (160 m³/h)
Connection

2-pole „Push-In“ connection clamp stranded wire1 AWG 16
(1.5 mm²) with strain relief; max. AWG 12 (2.5 mm²)

Housingplastic, UL 94V-0, black
Mountingclip for 35 mm DIN rail, EN 60715 or M6 screws
and washers (not included), torque 2 Nm max.
Mounting positionvertical airflow (air outlet up)
Dimensions3.9 x 6.6 x 7.0" (99 x 168 x 179 mm)
Weightapprox. 2.86 lbs. (1.3 kg)
Operating temperature-4 to +167 °F (-20 to +75 °C)
Storage temperature-40 to +176 °F (-40 to +80 °C)
Operating/Storage humiditymax. 90 % RH (non-condensing)
Protection type/Protection classIP20 / II (double insulated)
ApprovalsUL File No. E234324, VDE, EAC
Noteother versions (heating capacities, setting ranges)
as well as operating voltage DC 48 V on request

¹ When connecting with stranded wires, wire end ferrules must be used.

Part No.ModelOperating voltageHeating capacityRecommended
pre-fuse T (time-delay)
Setting range³ temperature / humidity
13092.1-16Thermostat with
internal sensor
DC 24 V200 W25.0 A-4 to 104 °F
13092.1-17Thermostat with connector
for external sensor²
DC 24 V200 W25.0 A-4 to 104 °F
13097.3-16Thermostat with
internal sensor
DC 56 V800 W25.0 A-4 to 104 °F
13097.3-17Thermostat with connector
for external sensor²
DC 56 V800 W25.0 A-4 to 104 °F
13092.1-03Hygrostat with connector
for external sensor²
DC 24 V200 W25.0 A40 to 90 % RH
13095.3-03Hygrostat with connector
for external sensor²
DC 56 V600 W25.0 A40 to 90 % RH

² The external sensor needs to be ordered separately.
³ Switching difference temperature: 3 K (±1 K tolerance) at +77 °F (+25 °C), 50 % RH; switching difference humidity: 4 % RH (±1 % tolerance) at +77 °F (+25 °C), 50 % RH.

Accessories

The external sensor is not included in the delivery of the DCR 130. It can be ordered separately.

External Sensor

The external sensor can be positioned freely anywhere in the enclosure for precise measurements of temperature and humidity. 

Part No.Length
2670713.28 ft (1 m)
2670726.56 ft (2 m)
2671269.84 ft (3 m)

 

 

Dimensioned Drawing

High-performance Fan Heater DCR 130