Electronic Thermostat
DCT 010

  • High DC switching capacity
  • Adjustable temperature
  • Small hysteresis
  • Optical operating display (LED)
  • Integrated switch module
  • Precise measurement via an external sensor

The electronic thermostat with integrated switch module is used to control DC powered devices with high capacities in control and switch cabinets. Heaters, coolers, filter fans or signal devices can directly be controlled via an internal electronic circuit. The external sensor can be positioned freely anywhere in the control cabinet for precise temperature measurements. Additionally, this thermostat is available in versions that not only measure temperature via the external sensor, but also the relative humidity.

Technical Data

Download PDF

Switch difference (temperature)3 K (±1 K tolerance) at +25 °C (+77 °F), 50 % RH
Reaction timeapprox. 5 sec.
External sensorcable 2 m with snap in connector (included in the delivery)
Contact typecontact maker NO (MOSFET) or contact breaker NC (MOSFET)
Service life> 100,000 cycles
Operating voltageDC 20 to 56 V
Optical indicatorLED
Connection6-pole terminal: stranded wire1 1.5 mm² (AWG 16);
max. 2.5 mm² (AWG 12)
Mountingclip for 35 mm DIN rail, EN 60715
Casingplastic according to UL94 V-0, grey (bicolor)
Dimensions93 x 53 x 44 mm
Weightapprox. 120 g (incl. sensor)
Fitting positionvertical
Storage temperature-40 to +80 °C (-40 to +176 °F)
Operating/Storage humiditymax. 90 % RH (non-condensing)
Protection typeIP20
ApprovalsUL File No. E164102, VDE, EAC
Noteother versions (e.g. setting ranges and °F) on request

1 When connecting with stranded wires, wire end ferrules must be used.

Art. No. Max. switching capacityOperating temperaturePrimary switching function -
setting range temperature
Secondary switching function² - humidity settingContact (primary)
01011.0-21DC 13 A-30 °C to +50 °C (-22 °F to +122 °F)-10 to +50 °CContact maker (NO)
01011.0-22DC 11 A-30 °C to +60 °C (-22 °F to +140 °F)0 to +60 °C-Contact maker (NO)
01011.0-41DC 13 A-30 °C to +50 °C (-22 °F to +122 °F)-10 to +50 °C65 % RH pre-setContact breaker (NC)
01011.0-42DC 11 A-30 °C to +60 °C (-22 °F to +140 °F)0 to +60 °C65 % RH pre-setContact breaker (NC)

² Versions with secondary switching function can also register the humidity and therefore offer an additional protection for electronics.
Switch difference: 4 % RH (±1 % tolerance) at +25 °C (+77 °F), 50 % RH.

Technical Drawing

Electronic Thermostat DCT 010
External sensor