Semiconductor Heater
HG 140 | 15W to 150W

  • Pressure clamp connectors
  • Dynamic heating up
  • Wide voltage range
  • Energy saving
  • Clip fixing
  • Quick installation

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes the heat evenly. The heaters are designed for permanent operation. Pressure clamb connectors save time and simplify installation.

Technical Data

Download PDF

Operating voltage120-240V AC/DC¹ (min. 110V, max. 265V)
Heating elementPTC resistor - temperature limiting
Heater bodyextruded aluminium profile, anodised
Connection3 pressure clamps for stranded wire 0.5-1.5mm² (with wire
end ferrule) and rigid wire 0.5- 2.5mm²
Connection casingplastic according to UL94 V-0, black
Mountingclip for 35mm DIN rail, EN 60715
Fitting positionvertical airflow (air outlet up, connection on bottom)
Operating/Storage temperature-45 to +70°C (-49 to +158°F)
Operating/Storage humiditymax. 90% RH (non-condensing)
Protection type/Protection classIP20 / I (earthed)
ApprovalsVDE, UL File No. E150057, EAC
Accessoiresscrew fixing, Art. No. 09024.0-00 (1 packing unit = 2 pieces)
Noteother voltages on request

¹ Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.

To top

Art. No.Heating capacity²Inrush current max.Recommended
pre-fuse T (time-delay)
Length (L)Weight (approx.)
14000.0-0015W1.5A2.0A65mm0.3kg
14001.0-0030W3.0A4.0A65mm0.3kg
14003.0-0045W3.5A4.0A65mm0.3kg
14005.0-0060W2.5A4.0A140mm0.4kg
14006.0-0075W4.0A6.3A140mm0.5kg
14007.0-00100W4.5A8.0A140mm0.5kg
14008.0-00150W9.0A10.0A220mm0.7kg

² at +20°C (+68°F) ambient temperature

To top

Technical drawing

Semiconductor Heater HG 140 Series

To top