Touch-safe Heater (Semiconductor)
CS 060 | 50W to 150W

  • Low surface temperature
  • Quick mounting due to clip fixing
  • Double insulated (plastic)
  • Wide voltage range
  • Small size

Touch-safe heater for the use in enclosures with electrical/electronical components. The design of the heater supports the natural convection which results in a high air-current of warm air. The surface temperatures on the accessible side surfaces of the housing are kept down as a result of the heater design. Our complete range of thermostats and hygrostats can directly be connected to the heater CS 060. This heater is also available in a version with plug-in thermostat requiring no additional wiring (CSF 060). The heaters are designed for permanent operation.

Technical Data

Download PDF


Operating voltage120 - 240V AC/DC¹ (min. 110V, max. 265V)
Heating elementPTC resistor - temperature limiting
Surface temperature< +80°C (+176°F), except upper protective grille
Connection4-pole terminal 2.5mm², torque 0.8Nm max.
Casingplastic according to UL94 V-0, black
Mountingclip for 35mm DIN rail, EN 60715
Fitting positionvertical airflow (air outlet up, connection on bottom)
Operating/Storage temperature-45 to +70°C (-49 to +158°F)
Operating/Storage humiditymax. 90% RH (non-condensing)
Protection type/Protection classIP20 / II (double insulated)
ApprovalsVDE, UL File No. E150057, EAC
Noteother voltages on request

¹ Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.

To top

Art. No.Heating capacity²Inrush current (max.)Recommended
pre-fuse T (time-delay)
Air outlet temperature³DimensionsWeight (approx.)
06000.0-0050W2.5A4.0A+86°C (+186.8°F)110 x 60 x 90mm0.3kg
06010.0-00100W4.5A8.0A+120°C (+248°F)110 x 60 x 90mm0.3kg
06020.0-00150W8.0A10.0A+145°C (+293°F)150 x 60 x 90mm0.5kg

² ambient temperature - see Heating capacity / Ambient temperature diagram; ³ measured 50mm above protective grille

To top

Technical drawing

Touch-safe Heater CS 060 Series (Semiconductor)

To top