Drainage Device
DD 084 | IP66 / IP67 / IP69K

  • High degree of protection
  • Good drainage performance
  • Easy to install
  • Weather and UV-light resistant

Condensation can occur in enclosures with high protection types by variations in temperature. The use of a DD 084 drainage device allows the removal of the condensate without losing the maximum IP66 protection type. The specific characteristic of the water permeable membrane ensures the drainage of the condensate via capillary action. The unique construction also prohibits the ingression of splash water into the enclosure.

Technical Data

Download PDF

Mountingthread M50 x 1.5 with nut (wrench size 60 mm, housing 50 mm)
Torque6 Nm max.
Depth in enclosureapprox. 0.7" (17.5 mm)
Materialplastic according to UL 94V-0, umbra grey,
weather and UV light resistant according UL 746C (f1)
Water entry height0 mm (at 0.5 mm wall thickness)
Sealingsealing gasket NBR
Water flow-throughapprox. 200 ml/hr at 5 mm water column
DimensionsØ 2.36" x 1.9" (Ø 60 x 49.5 mm)
Mounting positionvertical, lowest point
Operating / Storage temperature-49 to +158 °F (-45 to +70 °C)
ApprovalsEAC

To top

Installation
Make cut-out Ø 2.0 inches (50.5+0.5 mm) in enclosure bottom and mount drainage device with nut. Please make sure that the sealing gasket is put in place on the outer side panel of the enclosure and the hole is free of burrs.

To top

Part No.Protection typeEnclosure wall thickness1 package unitWeight (approx.)
08410.0-00IP66 / IP67 (EN 60529) / IP69K (EN 40050-9)0.5 - 5.5 mm1 piece2 oz. (60 g)

To top

Dimensioned Drawing

Drainage Device DD 084

To top