Switch Module
SM 010 | 24VDC and 48VDC

  • High DC switching capacity
  • Variety of applications
  • Compact design
  • Simple connection
  • Clip fixing

The Switch Module is designed for switching DC equipment with high currents. It is controlled via an external, potential-free contact (thermostat or hygrostat) connected between terminals 1 and 2. For switching the Module, the internally generated signal current has to be used. It must ne ensured that the external contact can safely switch this signal current. The SM 010 is available in 24VDC and 48VDC versions.

Technical Data

Download PDF

Contact typecontact maker normally open (Relay/MOSFET)
Service life> 100,000 cycles
Max. inrush currentDC 16A
Connection6-pole terminal, clamping torque 0.5Nm max.:
rigid wire 2.5mm² (AWG 14)
stranded wire1 1.5mm² (AWG 16)
Mountingclip for 35mm DIN rail, EN 60715
Casingplastic according to UL94 V-0, light grey
Dimensions67 x 50 x 46mm
Weightapprox. 90g
Fitting positionvariable
Operating/Storage temperature-45 to +70°C (-49 to +158°F)
Operating/Storage humiditymax. 90% RH (non-condensing)
Protection typeIP20
ApprovalsVDE, EAC

To top

¹ When connecting with stranded wires, wire end ferrules must be used.

Art. No.Operating voltageMax. switching capacitySignal current
01001.0-0024VDC (20-28VDC)28VDC, 16A13mA at 20VDC / 22mA at 28VDC
01000.0-0048VDC (38-56VDC)56VDC, 16A10mA at 38VDC / 18mA at 56VDC

To top

Technical Drawing

Switch Module SM 010 (24VDC + 48VDC)

To top